Cold knowledge of outdoor creative advertising boards

In daily life, we can always see attractive advertising panels placed in shopping malls, enterprises, schools, communities and for sale yard signs. These panels have attractive advertising texts and realistic product photos. The advertising panel production makes these ads immediately arise everyone's attention, so as to achieve results.

And today we are going to learn some cold knowledge of outdoor creative advertising boards.

Knowledge point 1: KT board

The most commonly used one has a thickness of 5mm~8mm, and the splayed board is a kind of kt board, with good quality. Low cost, lighter and more brittle, suitable for hanging on the wall, and afraid of extrusion.

Knowledge Point 2: Acrylic

That is plexiglass, mainly composed of two pieces of acrylic with a certain thickness, suitable for various occasions, equivalent to higher cost, good light transmission, not fragile, easy to process, beautiful appearance, high surface gloss, there are also Call it a crystal photo frame.

The advertising display panel is formed by coating the surface again, which has the characteristics of stiffness, lightness, flatness, not easy to deform, economical and applicable features and has the functions of heat preservation, moisture proof, sound insulation and so on.

Knowledge point 3: Chevron board

Also known as pvc foam board and Andy board, with polyvinyl chloride (PVC) as the main raw material. The texture is very hard and can be placed for a long time. The thickness is different from 2mm to 10mm. It can be made thinner.

Knowledge point 4: high-density board

A commonly used frameless painting, also known as Lamina. The thickness is between 9mm~12mm, integrated molding, fine workmanship, high definition, strong three-dimensional sense, high grade, delicate painting, rich colors, waterproof and moisture-proof, easy to install, durable, long-term use without deformation and fading. The production size can be customized, which is better than traditional commonly used display panels. Applicable to various occasions (such as museums, showrooms, conference rooms, exhibition halls and other industries.

And how can we keep these for sale yard signs for relatively a long time?

Firstly, we can prevent the color buckle plate from falling off depends on the direction of the buckle plate

The most commonly used color steel gusset is the horizontal direction, so that the strength and gravity are balanced. And some small brands use vertical gussets, then the gussets within 2 meters have no effect, and the gussets over 2 meters If you do it again, you may find it fall off.

Secondly, we can use the keel more.

In order to reduce the production cost of some advertising shops, one keel should be spaced at a distance of 1 meter to a distance of 1.5 meters. Then the fastening of the gusset plate is reduced and it is easy to loosen. The most accurate interval is 80-100 cm spacing.

That’s the basic introduction of some cold knowledge of outdoor creative advertising boards. If you encounter any problems about anything, please feel free to send us inquiry and we will do our best to assist you to solve the issue.